Product links on YLF sometimes contain affiliate codes. If you follow one of these links and make a purchase, YLF might earn a commission. Read more about how YLF makes money.
Welcome! Read about what to wear and how to wear it on the YLF Blog. Join the YLF Forum to ask specific questions or just chat about fashion and personal style. Or check out the curated list of things we love in YLF Finds.
I never understood the safety pin thing, Angie. I will have to try it. @Mary: Lol. I used to use dryer sheets too but the smell can be overwhelming. Maybe I'll look for some unscented.
I often have static but some things that make it better are wool tights, a cotton full length closely fitted slip that is close fitting but just simple cotton, so not constricting, or a nylon half slip from M&S.
I haven’t tried the safety pin trick but will see if that works.
I have always been one that static follows around. I have many times passed on buying items that seem they will be to static-y. I usually did the dryer sheet. I have never heard of using safety pins. How did I miss trying this?
It’s so bizarre that slips are so difficult to find these days—they are clearly needed! I have a couple full-length ones. But you could try running slightly damp hands over the fabric to get rid of the static.
It’s static-y here in the desert because it’s dry. So I spray things with water. It helps, but isn’t perfect. Static spray works about the same. Same with safety pins.
Thanks, Fabbers. It sounds like there is no perfect solution. I've used water/damp hands to destatic my hair but that only works for a short time. (I could never live in the desert at least during the winter--that was a static fest!) I think my slip skirts are going to have to wait for more humid weather---that's the problem with buying off season. I forget about static!
Ok, I’m experimenting with the safety pins. I have one in each pants leg, on the seam, but sticking out so it is touching my leg. It seems to be working!
I’m using very small safety pins. They are not brass. I don’t know about coating. I bought them for adjusting elastic on masks, at an independent fabric store here. Previously I put the safety pin in the seam, running vertically. It had occurred to me that the charge wasn’t going anywhere, so I ran the pin horizontally.
This post has 1 photo. Photos uploaded by this member are only visible to other logged in members.
If you aren't a member, but would like to participate, please consider signing up. It only takes a minute and we'd love to have you.